Showing 1–12 of 408 results

100k Ohm 3590S Precision Multiturn Potentiometer

120.00

100k Ohm 3590S Precision Multiturn Potentiometer

BRAND - GENERIC

10K Ohm 9 PIN Resistor Network SIP

3.00
It is a 10K Ohm Through Hole Resistor Network. The resistor array is a passive nine-terminal electrical component that serves as eight 1K ohms resistances and one common ground.

1N4007 1000V 1A General Purpose Diode Through Hole DO-41

2.00
The IN4007 diode is a device which allows current flow through only one direction. That is the current should always flow from the Anode to cathode. For 1N4007 Diode, the maximum current carrying capacity is 1A it withstand peaks up to 30A. Hence we can use this in circuits that are designed for less than 1A. The reverse current is 5uA which is negligible. The power dissipation of this diode is 3W. BRAND - HORNBY PACKAGE - DO41 THORUGH HOLE DATASHEET

1N5819S Diode 40V 1A SCHOTTKY DO-41 HORNBY

1.25
The 1N5819-T is a Schottky Barrier Rectifier with moulded plastic case and solderable tin-plated terminals as per MIL-STD-202 standard. BRAND -HORNBY OR SIMILAR DATASHEET

24LC512-I/P EEPROM IC

80.00
EEPROM Memory IC 512Kbit I2C 400 kHz 900 ns 8-PDIP Brand : MICROCHIP DATASHEET

40 Pin DIP IC Socket Base

15.00
40 Pin IC Socket base adaptor is a 40 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.

500 Ohm 3590S Precision Multiturn Potentiometer

120.00

500 Ohm 3590S Precision Multiturn Potentiometer

BRAND - GENERIC

6264 RAM INTEGRATED CIRCUITS

100.00
The 6264 is a JEDEC-standard static RAM integrated circuit. It has a capacity of 64 Kbit (8 KB). BRAND- ZMD PACKAGE - DIP 28 DATASHEET

74HC04D IC

10.00
The 74HC04; 74HCT04 is a hex inverter. The inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. BRAND - NEXPERIA PACKAGE -SO14 DATASHEET

74HC138D IC

15.00
The 74HC138; 74HCT138 decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually exclusive outputs (Y0 to Y7). The device features three enable inputs (E1, E2 and E3). BRAND - NEXPERIA PACKAGE SO16 DATASHEET

74HC14D IC

10.00
The 74HC14; 74HCT14 is a hex inverter with Schmitt-trigger inputs. This device features reduced input threshold levels to allow interfacing to TTL logic levels. BRAND -NEXPERIA PACKAGE SO16 DATASHEET

74HC164D 8-bit serial-in, parallel-out shift register IC

10.00
8-bit serial-in, parallel-out shift register BRAND- NEXPERIA PACKAGE - SOIC -14 DATASHEET