The 74HC367; 74HCT367 is a hex buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A HIGH on nOE causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. It enables the use of current limiting resistors to interface inputs to voltages in excess of VCC
Sold out
74HC367D
₹20.00
Buffer, Non-Inverting 2 Element 2, 4 (Hex) Bit per Element 3-State Output 16-SO
BRAND – PHILLIPS
PACKAGE – SOIC 16
Out of stock
Description
Reviews (0)
Shipping & Delivery
Related products
ILX485DT RS-485/RS-422 Transceivers IC
The ILX485 is low-power transceivers for RS-485 and RS- 422 communication. IC contains one driver and one receiver.
Brand : IK SEMICON
DATASHEET
LM2940T-5 VOLTAGE REGULATOR IC
| The LM2940 regulator features the ability to source 1A of output current with a dropout voltage of typically 0.4V and maximum of 0.63V over the entire temperature range. |
LM39302R 3.0A HIGH-VOLTAGE VLDO VOLTAGE REGULATOR
| The LM39300, LM39301 and LM39302 are 3.0A low-dropout linear voltage regulators that provide a low voltage, high-current output with a minimum of external components. The LM39300/1 offers extremely low dropout (typically 400mV at 3.0A) and low ground current (typically 36mA at 3.0A). |
SN75176BDR
The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
Brand : Texas Instruments
DATASHEET
ACS712ELCTR-30A-T Hall-Effect-Based Linear Current Sensor IC
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
LM29302R HTC 1.5A HIGH-VOLTAGE VLDO VOLTAGE REGULATOR
The LM29300 are high current, high accuracy, low-dropout voltage regulators. Using process with a PNP pass element, these requlators feature 350mV (full load) dropout voltages and very low ground current.
Brand : HTC
DATASHEET
MAX232N
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
Reviews
There are no reviews yet.