The TL08xH (TL081H, TL082H, and TL084H) family of devices are the next-generation versions of the industry-standard TL08x (TL081, TL082, and TL084) devices. These devices provide outstanding value for cost-sensitive applications, with features including low offset (1 mV, typical), high slew rate (20 V/µs), and common-mode input to the positive supply. High ESD (1.5 kV, HBM), integrated EMI and RF filters, and operation across the full –40°C to 125°C enable the TL08xH devices to be used in the most rugged and demanding applications
TL084CN
₹30.00
The TL08xH (TL081H, TL082H, and TL084H) family of devices are the next-generation versions of the industry-standard TL08x (TL081, TL082, and TL084) devices.
Brand : Texas Instruments
DATASHEET
SKU:
TL084CN
Category: Integrated Circuits
Description
Additional information
| Brand |
TEXAS INSTRUMENTS |
|---|---|
| Package |
14 PIN DIP |
Reviews (0)
Be the first to review “TL084CN” Cancel reply
Shipping & Delivery
Related products
ACS712ELCTR-20A-T Hall-Effect-Based Linear Current Sensor IC
₹125.00
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
LM2950G-5V LOW DROPOUT VOLTAGE REGULATOR IC
₹6.00
The LM2950G is a low power voltage regulator. This device is an excellent choice for use in battery-powered application such as cordless telephones, radio-control systems, and portable computers. The LM2950G features a very low quiescent current (75uA typ.) and a very low drop output voltage (typ. 40mV at a light load and 380mV at 100mA).
Brand : HTC
DATASHEET
LM1117GS-5 HTC 1.0A LDO VOLTAGE REGULATOR
₹6.00
The LM1117 is a low power positive-voltage regulator designed to meet 1A output current. This device is an excellent choice for use in battery-powered applications, as active terminators for the SCSI bus, and portable computers.
Brand : HTC
DATASHEET
ISO3082DWR Isolated 5-V Full and Half-Duplex RS-485 Transceivers TEXAS INSTRUMENTS IC
₹50.00
The ISO3080 and ISO3086 devices are isolated fullduplex differential line drivers and receivers while the ISO3082 and ISO3088 devices are isolated half-duplex differential line transceivers for TIA/EIA 485/422 applications.
ISO3082DWR Isolated 5-V Full and Half-Duplex RS-485 Transceivers TEXAS INSTRUMENTS IC
Brand : Texas Instruments
DATASHEET
ACS712ELCTR-30A-T Hall-Effect-Based Linear Current Sensor IC
₹125.00
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
MAX232N TEXAS INSTRUMENTS IC
₹60.00
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
SN75176BDR
₹20.00
The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
Brand : Texas Instruments
DATASHEET


Reviews
There are no reviews yet.