The 74HC245; 74HCT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
74HC245PW IC
₹20.00
The 74HC245; 74HCT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Brand : NEXPERIA
DATASHEET
100 in stock
Description
Additional information
| PACKAGE |
TSSOP-20 |
|---|
Reviews (0)
Shipping & Delivery
Related products
LM29302R HTC 1.5A HIGH-VOLTAGE VLDO VOLTAGE REGULATOR
The LM29300 are high current, high accuracy, low-dropout voltage regulators. Using process with a PNP pass element, these requlators feature 350mV (full load) dropout voltages and very low ground current.
Brand : HTC
DATASHEET
LM1117GS-3.3V HTC 1.0A LDO VOLTAGE REGULATOR
The LM1117 is a low power positive-voltage regulator designed to meet 1A output current. This device is an excellent choice for use in battery-powered applications, as active terminators for the SCSI bus, and portable computers.
Brand : HTC
DATASHEET
ACS712ELCTR-30A-T Hall-Effect-Based Linear Current Sensor IC
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
LM2575GR-12V STEP-DOWN SWITCHING REGULATOR
| The LM2575 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regualtor(buck converter). All circuits of this series are capable of driving a 1A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, 15V, and an adjustable output version. |
MAX232N
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
W25Q32JVSSIQ IC FLASH 32MBIT SPI/QUAD 8SOIC
The W25Q32JV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power.
Brand : Winbond
DATASHEET
ILX232DT INTEGRATED CIRCUITS
IC ILX232 is purposed for application in high-performance information processing systems and control devices of wide application.
Brand : IK SEMICON
DATASHEET
Reviews
There are no reviews yet.