The 74HC245; 74HCT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
“SN75176BDR” has been added to your cart. View cart
74HC245PW IC
₹20.00
The 74HC245; 74HCT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Brand : NEXPERIA
DATASHEET
100 in stock
SKU:
74HC245PW
Category: INTEGRATED CIRCUITS
Description
Additional information
PACKAGE |
TSSOP-20 |
---|
Reviews (0)
Be the first to review “74HC245PW IC” Cancel reply
Shipping & Delivery
Related products
ILX3232DT RS232 Driver IC
₹25.00
The ILX3232 is a 3.3V powered EIA/TIA-232 and V.28/V.24 communication interface with low power requirements, high data-rate capabilities. ILX3232 has a proprietary low dropout transmitter output stage providing true RS-232 performance from 3.3vVto 5.5V supplies. The device requires only four small 0.1 µF standard external capacitors for operations from 3.3V supply.
Brand : IK SEMICON
DATASHEET
MAX232N
₹70.00
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
SN75176BDR
₹20.00
The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
Brand : Texas Instruments
DATASHEET
ACS712ELCTR-20A-T Hall-Effect-Based Linear Current Sensor IC
₹125.00
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
TCST2103 Vishay transmissive sensors
₹80.00
Optical Sensor Through-Beam 3.1mm Phototransistor Slotted Module, 4-Lead Dual Row
Brand : Vishay
DATASHEET
TCST1103 Vishay transmissive sensors
₹80.00
Optical Sensor Through-Beam 0.122" (3.1mm) Phototransistor Slotted Module, 4-Lead Dual Row
Brand : Vishay
DATASHEET
Reviews
There are no reviews yet.