The TS274 devices are low cost, quad operational amplifiers designed to operate with single or dual supplies. These operational amplifiers use the ST silicon gate CMOS process giving an excellent consumption-speed ratio. These series are ideally suited for low consumption applications.
Three power consumptions are available thus offering the best consumption-speed ratio for your application:
■ICC = 10 µA/amp: TS27L4 (very low power)
■ICC = 150 µA/amp: TS27M4 (low power)
â– ICC = 1 mA/amp: TS274 (standard)
Sold out
TS274IDT-quad operational amplifiers
₹35.00
The TS274 devices are low cost, quad operational amplifiers designed to operate with single or dual supplies.
BRAND – ST
SOIC – 14PIN
Out of stock
Description
Reviews (0)
Shipping & Delivery
Related products
MAX232N
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
SN75176BP
The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
Brand : Texas Instruments
DATASHEET
LM2950G-3.3V LOW DROPOUT VOLTAGE REGULATOR IC
The LM2950G is a low power voltage regulator. This device is an excellent choice for use in battery-powered application such as cordless telephones, radio-control systems, and portable computers. The LM2950G features a very low quiescent current (75uA typ.) and a very low drop output voltage (typ. 40mV at a light load and 380mV at 100mA).
Brand : HTC
DATASHEET
W25Q16JVSSIQ IC FLASH 16MBIT SPI/QUAD 8SOIC
The W25Q16JV (16M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 1µA for power-down.
Brand : WINBOND
w25q16jv spi revg 03222018 plus
LM2940T-5 VOLTAGE REGULATOR IC
| The LM2940 regulator features the ability to source 1A of output current with a dropout voltage of typically 0.4V and maximum of 0.63V over the entire temperature range. |
ACS712ELCTR-20A-T Hall-Effect-Based Linear Current Sensor IC
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
W25Q32JVSSIQ IC FLASH 32MBIT SPI/QUAD 8SOIC
The W25Q32JV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power.
Brand : Winbond
DATASHEET
Reviews
There are no reviews yet.