The LM111, LM211, and LM311 devices are single high-speed voltage comparators. These devices are designed to operate from a wide range of power-supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. These comparators are capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC+ or VCC−. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.
LM311DR IC
₹15.00
The LM111, LM211, and LM311 devices are single high-speed voltage comparators. These devices are designed to operate from a wide range of power-supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems.
BRAND – TEXAS INSTRUMENTS
PACKAGE – SO-8
DATASHEET
1000 in stock
Description
Reviews (0)
Shipping & Delivery
Related products
LM1117GS-5 HTC 1.0A LDO VOLTAGE REGULATOR
The LM1117 is a low power positive-voltage regulator designed to meet 1A output current. This device is an excellent choice for use in battery-powered applications, as active terminators for the SCSI bus, and portable computers.
Brand : HTC
DATASHEET
LM2575GR-12V STEP-DOWN SWITCHING REGULATOR
| The LM2575 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regualtor(buck converter). All circuits of this series are capable of driving a 1A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, 15V, and an adjustable output version. |
ACS712ELCTR-20A-T Hall-Effect-Based Linear Current Sensor IC
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
LM29302R HTC 1.5A HIGH-VOLTAGE VLDO VOLTAGE REGULATOR
The LM29300 are high current, high accuracy, low-dropout voltage regulators. Using process with a PNP pass element, these requlators feature 350mV (full load) dropout voltages and very low ground current.
Brand : HTC
DATASHEET
ILX485DT RS-485/RS-422 Transceivers IC
The ILX485 is low-power transceivers for RS-485 and RS- 422 communication. IC contains one driver and one receiver.
Brand : IK SEMICON
DATASHEET
SN75176BP
The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
Brand : Texas Instruments
DATASHEET
LM2576HVR-ADJ HTC STEP-DOWN SWITCHING REGULATOR
The LM2576HV series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V, 12V, 15V and adjustable output versions.
Brand : HTC
DATASHEET
MAX232N
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
Reviews
There are no reviews yet.