The HEF4013B is a dual D-type flip-flop with set and reset; positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. Schmitt-trigger action on the clock input makes the circuit highly tolerant of slower clock rise and fall times.
HEF4013BT Dual D-type flip-flop IC
₹15.00
The HEF4013B is a dual D-type flip-flop with set and reset; positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD.
BRAND – NEXPERIA
PACKAGE – SOIC 14
1000 in stock
Description
Reviews (0)
Shipping & Delivery
Related products
LM2940T-5 VOLTAGE REGULATOR IC
| The LM2940 regulator features the ability to source 1A of output current with a dropout voltage of typically 0.4V and maximum of 0.63V over the entire temperature range. |
LM2576HVR-5V HTC STEP-DOWN SWITCHING REGULATOR
The LM2576HV series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V, 12V, 15V and adjustable output versions.
Brand : HTC
DATASHEET
W25Q64JVSSIQ IC FLASH 64MBIT SPI/QUAD 8SOIC
The W25Q64JV (64M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power.
Brand : Winbond
DATASHEET
SN75176BP
The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
Brand : Texas Instruments
DATASHEET
ACS712ELCTR-30A-T Hall-Effect-Based Linear Current Sensor IC
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
MAX232N
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
LM29302R HTC 1.5A HIGH-VOLTAGE VLDO VOLTAGE REGULATOR
The LM29300 are high current, high accuracy, low-dropout voltage regulators. Using process with a PNP pass element, these requlators feature 350mV (full load) dropout voltages and very low ground current.
Brand : HTC
DATASHEET
Reviews
There are no reviews yet.