The Allegro™ ACS712 provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switchmode power supplies, and overcurrent fault protection. The device is not intended for automotive applications. The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a
proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.
ACS712ELCTR-30A-T Hall-Effect-Based Linear Current Sensor IC
₹125.00
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154″, 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
100 in stock
Description
Additional information
| Brand |
Allegro MicroSystems |
|---|---|
| Package / Case |
8-SOIC (0.154", 3.90mm Width) |
Reviews (0)
Shipping & Delivery
Related products
LM2950G-5V LOW DROPOUT VOLTAGE REGULATOR IC
The LM2950G is a low power voltage regulator. This device is an excellent choice for use in battery-powered application such as cordless telephones, radio-control systems, and portable computers. The LM2950G features a very low quiescent current (75uA typ.) and a very low drop output voltage (typ. 40mV at a light load and 380mV at 100mA).
Brand : HTC
DATASHEET
ILX485DT RS-485/RS-422 Transceivers IC
The ILX485 is low-power transceivers for RS-485 and RS- 422 communication. IC contains one driver and one receiver.
Brand : IK SEMICON
DATASHEET
TCST1103 Vishay transmissive sensors
Optical Sensor Through-Beam 0.122" (3.1mm) Phototransistor Slotted Module, 4-Lead Dual Row
Brand : Vishay
DATASHEET
MAX232N
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
LM2575GR-12V STEP-DOWN SWITCHING REGULATOR
| The LM2575 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regualtor(buck converter). All circuits of this series are capable of driving a 1A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V,12V, 15V, and an adjustable output version. |
LM35DZ/NOPB 1C high voltage analog temperature sensor IC
The LM35 series are precision integrated-circuit temperature devices with an output voltage linearly-proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling.
Brand : Allegro Microsystems
DATASHEET
ILX232DT INTEGRATED CIRCUITS
IC ILX232 is purposed for application in high-performance information processing systems and control devices of wide application.
Brand : IK SEMICON
DATASHEET
ILX3232DT RS232 Driver IC
The ILX3232 is a 3.3V powered EIA/TIA-232 and V.28/V.24 communication interface with low power requirements, high data-rate capabilities. ILX3232 has a proprietary low dropout transmitter output stage providing true RS-232 performance from 3.3vVto 5.5V supplies. The device requires only four small 0.1 µF standard external capacitors for operations from 3.3V supply.
Brand : IK SEMICON
DATASHEET
Reviews
There are no reviews yet.