The 74HC367; 74HCT367 is a hex buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A HIGH on nOE causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. It enables the use of current limiting resistors to interface inputs to voltages in excess of VCC
74HC367D
₹20.00
Buffer, Non-Inverting 2 Element 2, 4 (Hex) Bit per Element 3-State Output 16-SO
BRAND – PHILLIPS
PACKAGE – SOIC 16
200 in stock
Description
Reviews (0)
Shipping & Delivery
Related products
LM1117GS-5 HTC 1.0A LDO VOLTAGE REGULATOR
The LM1117 is a low power positive-voltage regulator designed to meet 1A output current. This device is an excellent choice for use in battery-powered applications, as active terminators for the SCSI bus, and portable computers.
Brand : HTC
DATASHEET
TCST2103 Vishay transmissive sensors
Optical Sensor Through-Beam 3.1mm Phototransistor Slotted Module, 4-Lead Dual Row
Brand : Vishay
DATASHEET
MAX232N
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
LM29302R HTC 1.5A HIGH-VOLTAGE VLDO VOLTAGE REGULATOR
The LM29300 are high current, high accuracy, low-dropout voltage regulators. Using process with a PNP pass element, these requlators feature 350mV (full load) dropout voltages and very low ground current.
Brand : HTC
DATASHEET
LM35DZ/NOPB 1C high voltage analog temperature sensor IC
The LM35 series are precision integrated-circuit temperature devices with an output voltage linearly-proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling.
Brand : Allegro Microsystems
DATASHEET
SN75176BDR
The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
Brand : Texas Instruments
DATASHEET
ILX232DT INTEGRATED CIRCUITS
IC ILX232 is purposed for application in high-performance information processing systems and control devices of wide application.
Brand : IK SEMICON
DATASHEET
Reviews
There are no reviews yet.