R5F100GEAFB RENESAS MICROCONTROLLER

R5F100GEAFB is a high-performance, low-power 16-bit microcontroller (MCU) belonging to the RL78/G13 series manufactured by Renesas Electronics Corporation.

True low-power platform (66 μA/MHz, and 0.57 μA for operation with only RTC and LVD) for the general-purpose applications, with 1.6-V to 5.5-V operation, 16- to 512-Kbyte code flash memory, and 41 DMIPS at 32 MHz

R5F100GEAFB RENESAS MICROCONTROLLER

1.1 Features

Ultra-low power consumption technology
 VDD = single power supply voltage of 1.6 to 5.5 V
 HALT mode
 STOP mode
 SNOOZE mode

RL78 CPU core
 CISC architecture with 3-stage pipeline
 Minimum instruction execution time: Can be changed from high speed (0.03125 μs: @ 32 MHz operation with high-speed on-chip oscillator) to ultra-low speed (30.5 μs: @ 32.768 kHz operation with subsystem clock)
 Address space: 1 MB
 General-purpose registers: (8-bit register × 8) × 4 banks
 On-chip RAM: 2 to 32 KB

Code flash memory
 Code flash memory: 16 to 512 KB
 Block size: 1 KB
 Prohibition of block erase and rewriting (security function)
 On-chip debug function
 Self-programming (with boot swap function/flash shield window function)

Data Flash Memory
 Data flash memory: 4 KB to 8 KB
 Back ground operation (BGO): Instructions can be executed from the program memory while rewriting the data flash memory.
 Number of rewrites: 1,000,000 times (TYP.)
 Voltage of rewrites: VDD = 1.8 to 5.5 V High-speed on-chip oscillator
 Select from 32 MHz, 24 MHz, 16 MHz, 12 MHz, 8 MHz,
6 MHz, 4 MHz, 3 MHz, 2 MHz, and 1 MHz
 High accuracy: +/- 1.0 % (VDD = 1.8 to 5.5 V, TA = -20 to +85°C)

Operating ambient temperature
 TA = -40 to +85°C (A: Consumer applications, D: Industrial applications )
 TA = -40 to +105°C (G: Industrial applications) Power management and reset function
 On-chip power-on-reset (POR) circuit
 On-chip voltage detector (LVD) (Select interrupt and reset from 14 levels) DMA (Direct Memory Access) controller
 2/4 channels
 Number of clocks during transfer between 8/16-bit SFR and internal RAM: 2 clocks

Multiplier and divider/multiply-accumulator
 16 bits × 16 bits = 32 bits (Unsigned or signed)
 32 bits ÷ 32 bits = 32 bits (Unsigned)
 16 bits × 16 bits + 32 bits = 32 bits (Unsigned or signed) Serial interface
 Simplified SPI (CSI Note 1): 2 to 8 channels
 UART/UART (LIN-bus supported): 2 to 4 channels
 I2C/Simplified I2C communication: 3 to 10 channels Timer
 16-bit timer: 8 to 16 channels
 12-bit interval timer: 1 channel
 Real-time clock:
 Watchdog timer: 1 channel (calendar for 99 years, alarm function, and clock correction function) 1 channel (operable with the dedicated low-speed on-chip oscillator)
A/D converter
 8/10-bit resolution A/D converter (VDD = 1.6 to 5.5 V)
 Analog input: 6 to 26 channels
 Internal reference voltage (1.45 V) and temperature sensor Note 2 I/O port
 I/O port: 16 to 120 (N-ch open drain I/O [withstand voltage of 6 V]: 0 to 4, N-ch open drain I/O [VDD withstand voltage Note 3/EVDD withstand voltage Note 4]: 5 to 25)
 Can be set to N-ch open drain, TTL input buffer, and on-chip pull-up resistor
 Different potential interface: Can connect to a 1.8/2.5/3 V device
 On-chip key interrupt function
 On-chip clock output/buzzer output controller Others
 On-chip BCD (binary-coded decimal) correction circuit Notes 1. Although the CSI function is generally called SPI, it is also called CSI in this product, so it
is referred to as such in this manual.
2. Can be selected only in HS (high-speed main) mode
3. Products with 20 to 52 pins
4. Products with 64 to 128 pins