The L78 series of three-terminal positive regulators is available in TO-220, TO-220FP, D²PAK and DPAK packages and several fixed
output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type embeds internal current limiting, thermal shutdown and safe area protection, making it essentially indestructible. If adequate heat sinking current. Although designed primarily as fixed voltage regulators, these devices can be used with external component
L7805CV-DG VOLTAGE REGULATOR
₹13.00
The L78 series of three-terminal positive regulators is available in TO-220, TO-220FP, D²PAK and DPAK packages and several fixed
output voltages, making it useful in a wide range of applications.
BRAND – STM
PACKAGE – TO220
SKU:
L7805CV-DG
Categories: Integrated Circuits, ST MICROELECTRONICS, Voltage Regulator
Brand: ST MICROELECTRONICS
Description
Reviews (0)
Be the first to review “L7805CV-DG VOLTAGE REGULATOR” Cancel reply
Shipping & Delivery
Related products
ILX485DT RS-485/RS-422 Transceivers IC
₹25.00
The ILX485 is low-power transceivers for RS-485 and RS- 422 communication. IC contains one driver and one receiver.
Brand : IK SEMICON
DATASHEET
W25Q32JVSSIQ IC FLASH 32MBIT SPI/QUAD 8SOIC
₹30.00
The W25Q32JV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power.
Brand : Winbond
DATASHEET
SN75176BDR
₹20.00
The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
Brand : Texas Instruments
DATASHEET
MAX232N TEXAS INSTRUMENTS IC
₹60.00
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
ACS712ELCTR-20A-T Hall-Effect-Based Linear Current Sensor IC
₹125.00
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
LM2940T-5 VOLTAGE REGULATOR IC
₹26.00
| The LM2940 regulator features the ability to source 1A of output current with a dropout voltage of typically 0.4V and maximum of 0.63V over the entire temperature range. |


Reviews
There are no reviews yet.