The LM1117 is a low power positive-voltage regulator designed to meet 1A output current. This device is an excellent choice for use in battery-powered applications, as active terminators for the SCSI bus, and portable computers. The LM1117 features very low quiescent current and very low dropout voltage of 1V at a full load and lower as output current decreases. LM1117 is available as an adjustable or fixed 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, and 5.0V output voltages. The LM1117 is offered in a 3-pin surface mount package SOT-223. The output capacitor of 10µF or larger is needed for output stability of LM1117 as required by most of the other regulator circuits.
LM1117GS-5 HTC 1.0A LDO VOLTAGE REGULATOR
₹10.00
The LM1117 is a low power positive-voltage regulator designed to meet 1A output current. This device is an excellent choice for use in battery-powered applications, as active terminators for the SCSI bus, and portable computers.
Brand : HTC
DATASHEET
1000 in stock
Description
Additional information
| Brand |
HTC |
|---|---|
| Package |
SOT223 |
Reviews (0)
Shipping & Delivery
Related products
ACS712ELCTR-20A-T Hall-Effect-Based Linear Current Sensor IC
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
W25Q128JVSIQ IC FLASH 128MBIT SPI/QUAD 8SOIC
The W25Q128JV (128M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power.
Brand : Winbond
DATASHEET
MAX232N
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
LM39302R 3.0A HIGH-VOLTAGE VLDO VOLTAGE REGULATOR
| The LM39300, LM39301 and LM39302 are 3.0A low-dropout linear voltage regulators that provide a low voltage, high-current output with a minimum of external components. The LM39300/1 offers extremely low dropout (typically 400mV at 3.0A) and low ground current (typically 36mA at 3.0A). |
LM2576HVR-5V HTC STEP-DOWN SWITCHING REGULATOR
The LM2576HV series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V, 12V, 15V and adjustable output versions.
Brand : HTC
DATASHEET
SN75176BP
The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
Brand : Texas Instruments
DATASHEET
LM2940T-5 VOLTAGE REGULATOR IC
| The LM2940 regulator features the ability to source 1A of output current with a dropout voltage of typically 0.4V and maximum of 0.63V over the entire temperature range. |
ILX3232DT RS232 Driver IC
The ILX3232 is a 3.3V powered EIA/TIA-232 and V.28/V.24 communication interface with low power requirements, high data-rate capabilities. ILX3232 has a proprietary low dropout transmitter output stage providing true RS-232 performance from 3.3vVto 5.5V supplies. The device requires only four small 0.1 µF standard external capacitors for operations from 3.3V supply.
Brand : IK SEMICON
DATASHEET
Reviews
There are no reviews yet.