74HC595D IC
The 74HC595; 74HCT595 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks.
BRAND - NEXPERIA
PACKAGE - 16- SOIC
DATASHEET
74HC595PW IC
The 74HC595; 74HCT595 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks.
BRAND - NEXPERIA
PACKAGE - 16PIN TSSOP
DATASHEET
74HC597D NEXPERIA CMOS Logic 8-Bit IC
The ’HC597 is high-speed silicon gate CMOS devices that are pin compatible with the LSTTL 597 devices. Each device consists of an 8-flip-flop input register and an 8-bit parallel-in/serial-in, serial-out shift register. Each register is controlled by its own clock.
BRAND - NEXPERIA
PACKAGE - SOIC 16
74HCT573D INTEGRATED CIRCUITS SOIC 20Pin
The 74HC573; 74HCT573 is an 8-bit D-type transparent latch with 3-state outputs.
BRAND - PHILLIPS
PACKAGE -SO20
DATASHEET
HEF40106BT Hex inverting Schmitt trigger IC
The HEF40106B is a hex inverter with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD.
BRAND- NEXPERIA
PACKAGE - SOIC 14
DATASHEET
HEF4011BT Quad 2-input NAND gate IC
The HEF4011B is a quad 2-input NAND gate. The outputs are fully buffered for the highest noise immunity and pattern insensitivity to output impedance.
BRAND - NEXPERIA
PACKAGE - SOIC 14
DATASHEET
HEF4013BT Dual D-type flip-flop IC
The HEF4013B is a dual D-type flip-flop with set and reset; positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD.
BRAND - NEXPERIA
PACKAGE - SOIC 14
DATASHEET
HEF4053BT
The HEF4053B is a triple single-pole double-throw analog switch (3x SPDT) suitable for use in analog or digital 2:1 multiplexer /demultiplexer applications. Each switch features a digital select input (Sn), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z). A digital enable input (E) is common to all switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD.
BRAND - NEXPERIA
PACKAGE - SOIC 16
DATASHEET