Showing 13–20 of 20 results

HEF4052BT

10.00
The HEF4052B is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer /demultiplexer applications. BRAND - NEXPERIA PACKAGE - SOIC 16 DATASHEET

HEF4053BT

15.00
The HEF4053B is a triple single-pole double-throw analog switch (3x SPDT) suitable for use in analog or digital 2:1 multiplexer /demultiplexer applications. Each switch features a digital select input (Sn), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z). A digital enable input (E) is common to all switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. BRAND - NEXPERIA PACKAGE - SOIC 16 DATASHEET

HEF4060BT

15.00
The HEF4060B is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, REXT and CEXT), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). BRAND - NEXPERIA PACKAGE - SOIC 16 DATASHEET  

HEF4066BT Dual precision monostable multivibrator IC

15.00
The HEF4066B is a quad single pole, single throw analog switch BRAND - NEXPERIA PACKAGE - SO14 DATASHEET

HEF4093BT Quad 2-input NAND Schmitt trigger IC

15.00
The HEF4093B is a quad 2-input NAND gate with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. BRAND - NEXPERIA PACKAGE - SOIC 14 DATASHEET

HEF4094BT

15.00
The HEF4094B is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks BRAND - NEXPERIA PACKAGE - SOIC 16 DATASHEET

HEF4538BT Dual precision monostable multivibrator

20.00
The HEF4538B is a dual retriggerable-resettable monostable multivibrator. Each multivibrator has an active LOW trigger/retrigger input (nA), an active HIGH trigger/retrigger input (nB), an overriding active LOW direct reset input (nCD), an output (nQ) and its complement (nQ), and two pins (nREXT/CEXT, and nCEXT, always connected to ground) for connecting the external timing components CEXT and REXT. Typical pulse width variation over the specified temperature range is ±0.2 %. BRAND - NXP PACKAGE - SO-16 DATASHEET

PDTC143ZT Digital Transistors

5.00
NPN Resistor-Equipped Transistor (RET) in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package. PNP complement: PDTA143ZT PACKAGE - SOT23-2 BRAND - NEXPERIA DATASHEET