The LD1117 is a low drop voltage regulator able to provide up to 800 mA of output current, available even in adjustable version
(VREF = 1.25 V). Concerning fixed versions, are offered the following output voltages: 1.2 V, 1.8 V, 2.5 V, 2.85 V, 3.3 V and 5.0 V. The device is supplied in: SOT-223, DPAK, SO-8 and TO-220. The SOT-223 and DPAK surface mount packages optimize the thermal characteristics even offering a relevant space saving effect. High efficiency is assured by NPN pass transistor. In fact in this
case, unlike than PNP one, the quiescent current flows mostly into the load. Only a very common 10 µF minimum capacitor is needed for stability. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ± 1 % at 25 °C. The adjustable LD1117 is pin to pin compatible with the other standard. Adjustable voltage regulators maintaining the better performances in terms of drop and tolerance.
LD1117S33TR SOT-223 LDO Voltage Regulator IC
₹20.00
The LD1117 is a low drop voltage regulator able to provide up to 800 mA of output current, available even in adjustable version
(VREF = 1.25 V). Concerning fixed versions, are offered the following output voltages: 1.2 V, 1.8 V, 2.5 V, 2.85 V, 3.3 V and 5.0 V.
Brand : ST
DATASHEET
100 in stock
SKU:
LD1117S33TR
Category: INTEGRATED CIRCUITS
Description
Additional information
Brand |
STMicroelectronics |
---|---|
Package |
SOT223 |
Reviews (0)
Be the first to review “LD1117S33TR SOT-223 LDO Voltage Regulator IC” Cancel reply
Shipping & Delivery
Related products
ACS712ELCTR-20A-T Hall-Effect-Based Linear Current Sensor IC
₹125.00
Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)
Brand : Allegro Microsystems
Datasheet
LM1117GS-3.3V HTC 1.0A LDO VOLTAGE REGULATOR
₹10.00
The LM1117 is a low power positive-voltage regulator designed to meet 1A output current. This device is an excellent choice for use in battery-powered applications, as active terminators for the SCSI bus, and portable computers.
Brand : HTC
DATASHEET
LM2950G-5V LOW DROPOUT VOLTAGE REGULATOR IC
₹10.00
The LM2950G is a low power voltage regulator. This device is an excellent choice for use in battery-powered application such as cordless telephones, radio-control systems, and portable computers. The LM2950G features a very low quiescent current (75uA typ.) and a very low drop output voltage (typ. 40mV at a light load and 380mV at 100mA).
Brand : HTC
DATASHEET
LM29302R HTC 1.5A HIGH-VOLTAGE VLDO VOLTAGE REGULATOR
₹75.00
The LM29300 are high current, high accuracy, low-dropout voltage regulators. Using process with a PNP pass element, these requlators feature 350mV (full load) dropout voltages and very low ground current.
Brand : HTC
DATASHEET
LM2940T-5 VOLTAGE REGULATOR IC
₹50.00
The LM2940 regulator features the ability to source 1A of output current with a dropout voltage of typically 0.4V and maximum of 0.63V over the entire temperature range. |
W25Q16JVSSIQ IC FLASH 16MBIT SPI/QUAD 8SOIC
₹30.00
The W25Q16JV (16M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 1µA for power-down.
Brand : WINBOND
w25q16jv spi revg 03222018 plus
MAX232N
₹70.00
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
Brand : Texas Instruments
DATASHEET
Reviews
There are no reviews yet.